PCI Apoten®
Epoxy coating
for industrial floors subject to chemicals and heavy mechanical use
Areas of application
- For indoor and outdoor use.
- Highly wear-resistant and chemical-resistant coating on concrete surfaces and cement screeds.
- For all industrial areas such as warehouses, assembly halls, production halls, ramps and roadways, also on safety kerbs and forklifts in operation.
- For casting the pool edge in swimming pools.
- Can be applied by roller as a sealing from 0.3 mm.
- Can be applied as a coating from 1 mm layer thickness.
- For surfaces subject to an increased mechanical use caused by impact filled with silica sand 1 : 1 up to a layer thickness of 3 mm.
Product features
- Highly wear resistant to high mechanical use.
- Free of solvents and silicone.
- Self leveling, highly efficient.
- Can be applied by roller and trowel.
- Reliable bond to concrete and cement screed, therefore high fatigue strength.
- Anti-slip properties can be adjusted up to slip valuation class R13/V6.
- Non-sag properties can be adjusted for sloped surfaces and wall surfaces.
- Can be scattered with colored chips.
- Resistant to chemicals such as acids, alkalis, oil and grease (see table „Chemical Resistance“).
- Certified to DIN EN 13813.
Colors:
approx. RAL 7030 stone grey, approx. RAL 7030 Stone Grey, approx. RAL 7032 Pebble Grey
Forms of delivery:
25-kg-set/ 20,80-kg-hobbock/ 4,20-kg-pail/ 10-kg-pail
Colors
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25-kg-set
pieces
20,80-kg-hobbock
pieces
10-kg-pail
pieces
4,20-kg-pail
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
Matching product systems
More product systemsReferences
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 13813 (SR-B2,0-AR0,5-IR7)
Classification report EN 13501-1 (Bfl-s1)
Combined with product:
PCI Finopur®, PCI Apoten®
Classification report EN 13501-1 (Bfl-s1)
Combined with product:
PCI Apoten®
Classification report EN 13501-1 (Bfl-s1)
Combined with product:
PCI Finopur®, PCI Apoten®, PCI Epoxigrund 390