PCI Escutan® TF

Polyurethane sealant

for sewage treatment plants, waterways, bridge construction and sewage systems

Technical data sheet

Polyurethane sealant

for sewage treatment plants, waterways, bridge construction and sewage systems

Technical data sheet

Areas of application

Product features

Areas of application

For indoor and outdoor use.
For walls and floors.
Elastic sealing of horizontal and vertical expansion joints and connection joints in civil engineering construction, including exposure to seepage water and non-pressing surface water in accordance with DIN 18195.
For sewage treatment plants, harbor facilities, waterways and locks with exposure to water under pressure up to 2 bar (at 2 cm joint width).
Sealing connections of pipes and precast elements used in sewer channels and ducts in accordance with the appropriate test report issued by Deutsches Institut für Bautechnik (German Center of Competence for Construction).
Elastic sealing of joints in screeds and concrete slabs.
Sealing of sheet metal flashings.
Sealing of collars on transmission towers.

Important note: Effective August 24, 2023, an appropriate training must be carried out before use (applies only to EU countries).
More information on the training courses is available here www.pci-augsburg.eu/pu-product-training.

Product features

Elastic, good recovery properties.
Water impermeable and resistant to water under pressure, recommended for exposure to permanent moisture and water under pressure up to 2 bar (at 2 cm joint width).
Resistant to weather conditions and aging, no embrittling, resistant to temperatures from -30°C to +80°C.
Resistant to chemicals, many kinds of acid, lye, grease and oil.
No thermoplasticity, superior to conventional bitumen and tar pastes.
Microbe resistant, resistant to the microorganisms contained in sewage water.
Root-proof, the joint sealant cannot be destroyed by root growth.
High resistance to mechanical stress, thus well suited for floor joints exposed to vehicular traffic.

Colors: grey, black

Forms of delivery: 2,50-l-can

Consumption calculator

This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.