PCI FT® Flex
Polymer-modified tile adhesive
specially for large-format fully vitrified flagstones
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- For all ceramic coverings laid in a thin bed: non-vitrified tiles, vitrified tiles, fully-vitrified tiles, porcelain mosaic, brick tiles and terracotta.
- Especially suitable to lay large-format fully-vitrified tiles on walls.
- On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, render, concrete, heated screeds, mastic asphalt (only in the interior), plasterboards, gypsum fiberboards, plaster slabs and plaster.
- For laying tiles and flagstones on PCI bonded waterproofing such as PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid or PCI Apoflex F/W.
- For laying ceramic coverings on PCI Pecilastic isolating membrane as well as PCI Pecilastic W and PCI Pecilastic U waterproofing membranes.
- For adhesive bed thickness from 1 to 5 mm.
Product features
- High non-sag properties even with heavy flagstones.
- Increased yield due to special additives and a unique combination of fillers.
- Creamy mortar which can be easily applied by trowel.
- Flexible, compensates movements in the substrate due to variations in temperature.
- Low in chromates.
- Very low emissions - GEV EMICODE EC 1 PLUS.
- Meets the requirements of C2 TE S1 in accordance with EN 12004 and the German "Guideline for flexible mortar" issued by Deutsche Bauchemie (German Building Industry).
Colors:
grey
Forms of delivery:
18-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
18-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 12004 (C2TE S1)
Sustainability data sheet
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI FT® Flex
