PCI FT® Klebemörtel
Tile adhesive
for non-vitrified tiles and vitrified tiles
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- For laying non-vitrified tiles, vitrified tiles and fully-vitrified tiles in a thin bed.
- On cement screed, rough-ground anhydrite screed, gypsum based floated screed, render, concrete, heated screed, mastic asphalt (indoors only), plaster boards, gypsum fiber boards, plaster slabs and plaster.
- For laying ceramic coverings in areas exposed to permanent wetness such as swimming pools (indoors and out), health spas as well as in wet areas such as showers, toilets, bathrooms and cold storage rooms.
- Also suitable for fully-vitrified tiles.
- For adhesive bed thickness from 1 to 5 mm.
Product features
- Non-sag properties, no need for spacers. The bedded tiles bond immediately, but can still be adjusted to the correct position.
- Good workability, therefore easy to apply.
- Resistant to frost and permanent water, multi-purpose use indoors and out, even in swimming pools and cold storage rooms.
- Good adhesion without pre-wetting and priming to concrete, cement screed and render.
- Meets the requirements of C2TE in accordance with DIN EN 12004 (test report TU Munich).
- With official test certificates for potable water application in accordance with DVGW worksheet W 270 and W 347 (Hygiene Institute Gelsenkirchen).
Test certificates are available under www.pci-augsburg.de.
Colors:
grey
Forms of delivery:
25-kg-bag/ 5-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25-kg-bag
pieces
5-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
Matching product systems
More product systemsReferences
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 12004 (C2TE)
Sustainability data sheet
Classification report EN 13501-1 (A1)
Combined with product:
PCI FT® Klebemörtel
Classification report EN 13501-1 (A1fl)
Combined with product:
PCI FT® Klebemörtel
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI FT® Klebemörtel