PCI FT® Rapid
Flexible fast-acting tile adhesive
for ceramic coverings
Areas of application
- For indoor and outdoor use.
- For walls and floors.
- For laying ceramic tiles and flagstones on to the bonded screeds PCI Lastogum, PCI Seccoral 1K, PCI Seccoral 2K Rapid, PCI Apoflex and PCI Pecilastic W in accordance with the valid regulations of the building standard list.
- For the installation of fully vitrified tiles on walls and floors.
- On cement screeds, rough-ground anhydrite screeds, gypsum based floated screeds, renders, concrete, heated screeds, mastic asphalt (only indoors), plasterboards and gypsum fibre boards, plaster slabs and plasters.
- For adhesive bed thickness from 1 to 5 mm.
With official test certificates
Product features
- High moistening ability, also suitable for fully vitrified tiles and low-absorbent substrates (e.g. very smooth concrete).
- Fast curing, walkable and groutable after 3 hours, therefore especially suitable if time is a factor.
- Flexible, meets the requirements of the regulation "Guideline for flexible mortar" (Deutsche Bauchemie e.V.).
- Non-sag properties, no need for battens and spacers. The laid tiles adhere immediately but can still be adjusted to the correct position.
- Good workability, therefore easy to apply.
Colors:
grey
Forms of delivery:
25-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
25-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
References
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 12004 (C2FT S1)
Sustainability data sheet
Classification report EN 13501-1 (A2-s1,d0)
Combined with product:
PCI FT® Rapid
Classification report EN 13501-1 (A2fl-s1)
Combined with product:
PCI FT® Rapid
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI FT® Rapid