PCI Nanorapid®
Polymer-modified tile adhesive
for ceramic and natural stone coverings
Areas of application
- For indoor and outdoor use.
- For floors.
- For laying tiles and natural stone.
- For outdoor use.
- For balconies, terraces, underfloor heating and areas subject to high mechanical loads in the industrial sector, such as in halls, rooms and corridors of industrial buildings, markets, institutional, service and administration buildings.
- For laying on cement screeds, sanded anhydrite screeds, heated screeds, dry screeds, mastic asphalt (only indoors) and on old floor tiles.
- For leveling uneven substrates before laying.
Product features
- Very high application convenience in connection with CSA technology, processing time approx. 60 minutes, walkable after approx. 90 minutes.
- Long correction time.
- Very good adhesion properties.
- Variable consistency setting, can be set as a thin bed, flowable bed or medium bed adhesive as required.
- High load capacity after a short setting time.
- Adhesive bed thickness 1-20 mm.
- Dust reduced.
- Effective crystalline water retention.
- Flexible, compensates for temperature fluctuations and tensions in the substrate.
- Very low emissions, GEV-EMICODE EC 1 PLUS.
- Meets the requirements of
– the "flexible mortar" guideline issued by Deutsche Bauchemie e.V.
- the classification C2 FE S1 according to DIN EN 12004.
All test certificates are available at www.pci-augsburg.eu
Colors:
Beige
Forms of delivery:
20-kg-bag
Consumption calculator
Your Result
Quantity Required approximately
kg
corresponds
20-kg-bag
pieces
This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.
YOUR DIRECT CONTACT
Downloads
Technical data sheet
Declaration of performance EN 12004 (C2FE S1)
Sustainability data sheet
Product flyer PCI Nanorapid
Licensing GEV EMICODE (EC1 PLUS)
Combined with product:
PCI Nanorapid®
Classification report EN 13501-1 (A2fl-s1)
Combined with product:
PCI Nanorapid®
