PCI Pavifix® PU

PUR joint grout

for natural stone pavers and concrete pavers

Technical data sheet

PUR joint grout

for natural stone pavers and concrete pavers

Technical data sheet

Areas of application

Product features

Areas of application

For floors.
For indoor and outdoor use.
For joint width from 5 to 50 mm.
For water-permeable grouting of mosaic pavers, small pavers and large pavers from natural stone and concrete.
For traffic areas subject to medium use such as traffic reduced areas exposed to vehicles (cars or trucks), loading areas, market places, pedestrian precincts, parking lots, garden paths and garage entrances.

Important note: Effective August 24, 2023, an appropriate training must be carried out before use (applies only to EU countries).
More information on the training courses is available here www.pci-augsburg.eu/pu-product-training.

Product features

Two components.
Highly wear resistant, permanent resistance to weather conditions and mechanical use, e.g. by road sweepers.
Crack-free curing and setting without shrinking.
Water permeable, accumulated water (e.g. rain) quickly trickles into the ground. The surfaces are not completely sealed.
Resistant to frost and weather conditions, multi-purpose use outdoors, even on areas exposed to de-icing salt.
Color intensifying, the characteristics of the pavers are underlined.
Bag with sand mixture and integrated unit including binding agent for surfaces from medium to large size.
Variable mixing ratio:
- for surfaces exposed to vehicular traffic: 1 bag of sand mixture + 1 unit of binding agent
- for surfaces exposed to pedestrian traffic: 2 bags of sand mixture + 1 unit of binding agent

Colors: Beige, Transparent, Grey, Anthracite

Forms of delivery: 20,90-kg-set/ 20-kg-bag/ 0,90-kg-can

Consumption calculator

Your specification

Joint width (mm)

Joint depth (mm)

Area (m²)

Type of Pavement

Calculate now

Your Result

Quantity of resources required in approximately

kg

corresponds

20,90-kg-set

pieces

This consumption calculation included in the program contains approximate values based on experiences which might considerably vary upwards and also downwards depending on the structure of substrate, type of tiles, different profiles on the reverse sides, type of tiling tools, work method a.o. Calculations are therefore not allowed to be based on these values. In case of larger projects we recommend to assess the consumption by making a trial surface. Applications in the combined method (buttering-floating) increase the consumption by approx. 20 to 25%. In case of powder products the data relate to the consumption of dry powder for easier calculation of the material requirement.